Infrared Distance Sensor

• Detection Range: 0.1-10 m
• FOV: 20°
• Accuracy: 5%

Robotic Arm

• Movement Range: Horizontal: 22 cm, Vertical: 15 cm
• Number of Axes: 2

Gripper

• Range: Approx. 10 cm

Servo

• Weight: Approx. 70 g
• Body Dimensions: 44.2×22.6×28.6 mm
• Transmission Ratio: 512:1
• Operation Modes: Angle mode, Speed mode

Sensor Adaptor

• Port Type: IO, AD
• Number of Ports: 2

Power Connector Module

• Communication Port: CAN bus (5)
• Output: USB Type-A power port: 5V 2APower port with pin header: 5V 4ATX30 power port: 12V 5A
• Input: TX30 power port: 12 V

Camera

• FOV: 120°
• Max Still Photo Resolution: 2560×1440
• Max Video Resolution:
  • FHD: 1080/30fps
  • HD: 720/30fps
• Max Video Bitrate: 16 Mbps
• Photo Format: JPEG
• Video Format: MP4

• Sensor: CMOS 1/4″; Effective pixels: 5 MP
• Operating Temperature Range: -10 to 40 °C (14 to 104 °F)

Narrow Infrared Units

• Effective Range : 6 m (in indoor lighting conditions)

• Effective Area: Varies from 10° to 40°
  Effective area decreases as distance from the target increases.

Wide Infrared Units

• Effective Range : 3 m (in indoor lighting conditions)
• Effective Width: 360° (in indoor lighting conditions)

Hit Detector

• Detection Requirements: For the Hit Detector to be activated, the following conditions must be met: Gel bead diameter ≥ 6mm, launching speed ≥20m/s, and the angle between the hit direction and hit detector plane is no less than 45°.

• Maximum Detection Frequency: 15 Hz

EP

• Weight: Approx. 3.3 kg
• Dimensions: 320×240×270 mm (length × width × height)
• Chassis Speed Range:
  • 0-3.5 m/s (forward)
  • 0-2.5 m/s (backward)
  • 0-2.8 m/s (sideways)
• Max Chassis Rotational Speed: 600°/s

M35081 Brushless Motor

• Max Rotational Speed: 1000 rpm
• Max Torque: 0.25N·m
• Max Output Power: 19 W
• Operating Temperature Range: -10 to 40 °C (14 to 104 °F)
• Driver: FOC
• Control Method: Closed-loop speed control
• Protection:
  • Overvoltage protection
  • Overtemperature protection
  • Soft-start
  • Short-circuit protection
  • Chip and sensor anomaly detection

Gimbal

• Controllable Range:
  • Pitch: -20° to +35°
  • Yaw: ±250°
• Mechanical Range:
  • Pitch: -24° to +41°
  • Yaw: ±270°
• Max Rotational Speed: 540°/s
• Vibration Control Precision: ±0.02°
  (on the flat surface and with the Blaster idle)

Blaster

• Controllable Launching Frequency: 1-8/s
• Max Launching Frequency:10/s
• Initial Launching Speed: Approx. 26 m/s
• Average Load: Approx. 430

Intelligent Controller

• Latency:
  Connection via Wi-Fi: 80-100ms
  Connection via Router: 100-120ms
  (unobstructed, free of interference)
  
• Live View Quality: 720p/30fps
• Max Live View Bitrate: 6 Mbps
• Operating Frequency: 2.4 GHz, 5.1 GHz, 5.8 GHz
• Operating Mode: Connection via Wi-Fi, Connection via Router

• Max Transmission Distance:
  • Connection via Router:
    • FCC, 2.4 GHz 190 m, 5.8 GHz 300 m
    • CE, 2.4 GHz 180 m, 5.8 GHz 70 m
    • SRRC, 2.4 GHz 180 m, 5.8 GHz 300 m
    • MIC, 2.4 GHz 180 m
      
  • Connection via Wi-Fi:
    • FCC, 2.4 GHz 140 m, 5.8 GHz 90 m
    • CE, 2.4 GHz 130 m, 5.8 GHz 70 m
    • SRRC, 2.4 GHz 130 m, 5.8 GHz 90 m
    • MIC, 2.4 GHz 130 m

• Transmission Power (EIRP):
  • 2.400-2.4835 GHz
    FCC: ≤30 dBm
    SRRC: ≤20 dBm
    MIC: ≤20 dBm
    
  • 5.170-5.25 GHz
    FCC: ≤30 dBm
    SRRC: ≤23 dBm
    MIC: ≤23 dBm
    
  • 5.725-5.850 GHz
    FCC: ≤30dBm
    SRRC: ≤30dBm

• Transmission Standard: IEEE802.11a/b/g/n

Intelligent Battery

• Capacity: 2400 mAh
• Nominal Charging Voltage: 10.8 V
• Maximum Charging Voltage: 12.6 V
• Battery Type: LiPo 3S
• Energy: 25.92 Wh
• Weight: 169 g

• Operating Temperature Range: -10 to 40 °C (14 to 104 °F)
• Charging Temperature Range: 5 to 40 °C (41 to 104 °F)
• Maximum Charging Power: 29 W

• Battery Life in Use: 35 minutes
  (measured at a constant speed of 2 m/s on a flat surface)
• Battery Life on Standby: Approx. 100 minutes

Charger

• Input: 100-240 V, 50-60Hz, 1A
• Output: Port: 12.6 V=0.8A or 12.6 V=2.2A

• Voltage: 12.6 V
• Rated Voltage: 28 W

Gel Bead

• Diameter: 5.9-6.8 mm
• Weight: 0.12-0.17 g

App

• App: RoboMaster
• iOS: iOS 10.0.2 or later
• Android: Android 5.0 or later

Router

• Recommended Routers:
  TP-Link TL-WDR8600; TP-Link TL-WDR5640 (China)
  TP-Link Archer C7; NETGEAR X6S (International)

• Recommended outdoor power supply solution for routers:
  Laptop Power Bank (match the input power of the router)

MicroSD card

• Supports microSD cards with a capacity up to 64GB

System Requirements

Windows® 7, 8.1 or 10 (excluding Windows 10 S; latest service pack/build)
macOS 10.11 or later (latest update)

“Standard USB Type-A port, internet access to download driver for tablet to work and to select downloadable software* *Wacom ID and product registration required.

Cable Type

PVC-free USB Type A (PC) to Micro B (Tablet) with L-shape plug and dark silver plating

Tips: The Battery Charging Hub does not include a charger. Please use it together with a standard charger.

What is included in the Box?

• 1 x Tello Battery Charging Hub

Specifications

• Model: G1CH
• Compatible Battery Model: GB1-1100mAh-3.8V
• Operating Temperature Range: 41° to 113° F (5° to 45°C)
• Input Voltage: 5 V
• Input Current: 3 A (Max
• Weight: 1.0 oz (29 g)
• Charging Time* (Three batteries): Approx. 2 hours
  * Charging time was tested in a laboratory environment using a CE certified USB adapter rated at 5 V and 2 A. This value should be taken for reference only.

Compatibility: Tello Flight Battery

Highlights

• Specially made for Tello
• High-quality cells
• Easy to mount

What is included in the Box?

• 1 x Tello Flight Battery

Specifications

• Capacity: 1100 mAh
• Voltage: 3.8 V
• Battery Type: Lipo
• Energy: 4.18 Wh
• Net Weight: 26 g
• Operating Temperature: 5℃ to 45℃

Compatibility: Tello

• 1 x Aircraft
• 4 x Propellers (Pair)
• 1 x Tello Propeller Guards
• 1 x Tello Flight Battery
• 1 x Micro USB Cable
• 1 x Propeller Removal Tool
• 4 x Mission Pad

Develop fluency in concepts and languages of computer systems and foster digital creativity in your classroom. Students make the connections between abstract ideas and real world outcomes by working with software and hardware together: designing, building, prototyping, iterating (the experience of improving a design, as well as making mistakes and learning from them).

The BBC micro:bit is a physical computing device that provides a bridge between abstract concepts and tangible experiences.

Physical computing combines:
Computational thinking | Coding | Creativity | Innovation

Using the micro:bit, your students will gain vital competencies and skills in critical thinking and collaboration, building their ability and confidence to have ideas, share them and make them real.

The simplicity of the micro:bit’s design allows for immediate success, but also becomes a more sophisticated tool as your students’ knowledge and understanding grows.

From its origins in the BBC UK Make It Digital project of 2016, the micro:bit is changing the ways young people think about and work with technology today and for the future.

Get started at: https://microbit.org/get-started/first-steps/set-up/

Contents:

• 50 cards deck
• Starter guide / Battle map

View product description (Chinese) 

View full card list 

Content:

– 6 packs per box

– Every pack comes with 14 fixed rare cards and 1 random super rare card

– Total 20 types of card in this series (Details)

* For each box purchase, the box will contain an additional promotion card

Product Description

Content:

– 6 packs per box

– Every pack comes with 14 fixed rare cards and 1 random super rare card

– Total 20 types of card in this series (Details)

* For each box purchase, the box will contain an additional promotion card

Product Description

Content:

– 6 packs per box

– Every pack comes with 14 fixed rare cards and 1 random super rare card

– Total 20 types of card in this series (Details)

* For each box purchase, the box will contain an additional promotion card

Product Description